Most roofing problems we’re called to assess didn’t start with a storm. They started with a decision — a contractor chosen too quickly, a repair attempted without the right knowledge, a permit skipped to save money, a material upgrade passed on that would have paid for itself three times over in avoided damage.
After 40 years replacing and repairing roofs across Austin and Central Texas, these are the mistakes we see most consistently. Some of them are easy to make. None of them are hard to avoid once you know what to look for.
Mistake 1: Hiring based on price alone
A roof replacement is a 20-year commitment. The lowest bid in the stack is almost never the right choice — not because quality always costs more, but because a price that’s significantly below the others usually signals something: cheaper materials, a smaller crew working faster to hit a margin, subcontractors without adequate supervision, or a company that won’t be reachable when a warranty issue surfaces.
The Austin post-storm market makes this worse. After a significant hail event, out-of-state crews arrive within days, often offering prices that undercut established local contractors. They move quickly through as many jobs as possible and leave. By the time a leak appears at a flashing joint or a ridge cap lifts in the next wind event, they’re gone — and so is any practical recourse.
The more reliable path is to start with reputation rather than price. Ask neighbors, friends, or your HOA community who they’ve used recently and whether they’d use them again. A personal recommendation from someone whose roof has held up through two Austin storm seasons is worth more than any number of online quotes. Longevity in the local market matters too — a company that’s been operating in Austin for decades has a track record you can verify and an ongoing reputation to protect. Industry recognition like Owens Corning Preferred Contractor status signals that a company has met specific standards for installation quality and customer satisfaction.
Once you’ve identified a contractor you have good reason to trust, ask for a written, itemized estimate. It should break down materials — shingle product and grade, underlayment type, flashing approach — as well as labor scope, disposal, warranty terms, and how the permit is handled. A contractor who can’t or won’t put that in writing isn’t a contractor you want on your roof. Ask for proof of current general liability insurance — the actual certificate, not a verbal assurance — and check their BBB rating. In Texas, roofing contractors are not state-licensed, so reputation, longevity, industry recognition, and verifiable insurance coverage are the signals that matter.
→ Choosing a replacement contractor: Our roof replacement guide covers what to look for, what questions to ask, and what red flags to watch for when hiring a contractor for a full replacement.
Mistake 2: Attempting DIY repairs on a roof that needs professional attention
We understand the appeal. A few shingles blew off, the repair looks straightforward, and the cost of calling someone feels disproportionate to the visible damage. But DIY roof repairs in Austin go wrong in predictable ways, and the consequences tend to be more expensive than the original repair would have been.
The most common problems: nails driven through shingles rather than in the nail strip, creating immediate leak points. Sealant applied incorrectly over flashing that needs to be re-bedded, masking the failure without fixing it. Replacement shingles that aren’t properly integrated with the surrounding courses, leaving edge gaps that wind can exploit. Tarp installations that trap moisture against the deck, accelerating rot.
There’s also the inspection problem. A homeowner replacing a few shingles sees the shingles. A professional assessing the same area sees whether the deck underneath is sound, whether the flashing at the nearest penetration is contributing to the problem, and whether the shingles that blew off are a symptom of broader sealant failure across the roof. The visible repair and the actual problem are often not the same thing.
For minor, genuinely isolated damage on a new or recently replaced roof, a professional assessment still makes sense before any work is done — if only to confirm the scope is as limited as it looks.
If you're not sure whether your situation is a repair or something more, our article on roof repair vs. replacement covers the decision framework.
Mistake 3: Skipping the permit
Most full roof replacements in Austin require a permit through the City of Austin Development Services Department. Permits exist for a reason: the required inspection confirms that the work was done correctly, to code, and with materials appropriate for the application. That inspection protects you.
Skipping the permit is sometimes presented by contractors as a cost-saving measure. What it actually does: it removes the inspection backstop that would catch installation errors before they become your problem, creates potential complications when you sell the home (buyers’ inspectors sometimes flag unpermitted roofing work), and may affect your homeowners insurance coverage if a claim arises from work that wasn’t properly permitted.
Your contractor should pull the permit and manage the inspection process. If they suggest skipping it, or imply it isn’t required for a full replacement in the City of Austin, that’s a significant red flag about how they operate generally. Suburbs in the greater Austin area — Pflugerville, Round Rock, Cedar Park, Georgetown — have their own permit requirements; a reputable contractor knows which jurisdiction applies to your address.
Mistake 4: Passing on impact-resistant shingles in Austin’s hail corridor
Standard architectural shingles are a reasonable product. In most markets, they’re all you need. Austin is not most markets.
Central Texas sits in one of the most active hail corridors in the country. Significant hail events — stones large enough to crack standard shingles — hit the Austin area multiple times most years. A roof replaced with standard architectural shingles today will almost certainly face at least one damaging hail event before it reaches the end of its designed lifespan.
Impact-resistant shingles — Class 3 and Class 4 rated products — are tested to withstand hailstones without cracking. Class 4 is the highest rating. The cost difference over standard architectural shingles is real, but so are two offsetting factors: many Texas homeowners insurance carriers offer premium discounts for Class 3 or Class 4 products, which can recover a meaningful portion of the cost difference over time; and the avoided cost of a post-storm claim and re-roof within the first ten years of installation is difficult to overstate.
We’re an Owens Corning Preferred Contractor and install the Duration Storm, a Class 4 product, as our impact-resistant option. We’ve inspected enough post-storm roofs side by side — impact-resistant on one property, standard on the neighbor’s — to have a clear view of the difference. It’s worth discussing with your insurance agent before you choose a product for your replacement.
Mistake 5: Ignoring ventilation
Attic ventilation is one of the least visible components of a roofing system and one of the most consequential for long-term performance. It’s also one of the most commonly overlooked during replacement conversations.
In Austin’s climate, inadequate ventilation creates two problems. In summer, heat trapped in the attic raises temperatures against the underside of the roof deck — accelerating shingle aging and sealant degradation from the inside, compounding the UV degradation happening on the surface. In winter, moisture-laden warm air from the living space rises into the attic and, without adequate exhaust, condenses against the cold deck — contributing to rot and mold over time.
A properly ventilated attic has balanced intake at the eaves (soffit vents) and exhaust at or near the ridge. The ratio of intake to exhaust matters; a system that’s heavily weighted toward one or the other doesn’t work as designed. When a roof is being replaced, it’s the right moment to assess and correct the ventilation system — the marginal cost of addressing it during a re-roof is small compared to doing it as a separate project later.
If your contractor’s proposal doesn’t mention ventilation, ask about it specifically. A contractor who can’t explain what the current system is and whether it’s adequate hasn’t fully assessed what your roof needs.
Mistake 6: Roofing over instead of tearing off
Texas building codes in most jurisdictions allow up to two layers of shingles on a residential roof. That means it’s technically permissible to install new shingles directly over existing ones. It’s also a mistake in most circumstances.
Installing over existing shingles conceals the deck underneath — any rot, soft spots, or moisture damage that should be identified and replaced before the new roof goes down gets buried instead. It adds significant weight to the structure. It reduces the lifespan of the new shingles, which are now bonding to a surface that’s already weathered rather than clean sheathing. And it voids most manufacturer warranties, including Owens Corning’s — which matters if you ever need to make a material warranty claim.
If a contractor proposes roofing over your existing shingles as part of a full replacement without a specific structural reason, ask why. The answer will tell you something important about their approach to the job.
Mistake 7: Deferring storm damage assessment
After a significant hail or wind event, the instinct to wait — to see if a leak develops before calling anyone — is understandable but costly. Roof damage after a storm doesn’t stay contained. It develops.
Granule loss from hail impact accelerates UV degradation of the asphalt layer underneath. Lifted or creased shingles from wind are significantly more vulnerable to the next storm, which in Austin’s active spring season may be days or weeks away. And most Texas homeowners insurance policies require damage to be reported within a reasonable timeframe — the longer you wait, the harder it becomes to establish that a specific storm caused the damage rather than general wear, and insurers use that ambiguity.
The practical answer is a ground-level inspection after any storm that produced large hail or high winds — binoculars, a slow walk around the perimeter, a look at the gutters and downspouts for granule accumulation. If anything looks off, a professional assessment before the next event is almost always less expensive than the compounded damage that follows from waiting.
▸ → Storm damage assessment: Our hail and storm damage guide covers what hail and wind damage look like on a roof and how the insurance claim process works from first inspection through recovery. → /hail-damage-roof-austin/
→ Storm damage assessment: Our hail and storm damage guide covers what hail and wind damage look like on a roof and how the insurance claim process works from first inspection through recovery.
Frequently asked questions
Start with reputation — ask people you trust who’ve had roofing work done recently and whether they’d use the same contractor again. A strong personal recommendation from a neighbor whose roof has held up through Austin storm seasons is a more reliable signal than any marketing claim. From there: longevity in the local market (a company operating here for decades has a track record you can verify), industry recognition like Owens Corning Preferred Contractor status, a solid BBB rating, and proof of current general liability insurance — the actual certificate. In Texas, roofing contractors are not state-licensed, so these signals — reputation, longevity, recognition, and insurance — are what distinguish a legitimate operation from one that won’t be reachable when something goes wrong.
The ground-level assessment — checking for visible damage, clearing gutters, checking the attic — is entirely appropriate for homeowners to do themselves. Actual repairs on the roof surface are a different matter. The risk isn’t just injury from working at height, though that’s real. It’s that improper repairs — nails in the wrong place, sealant over a flashing failure, replacement shingles not properly integrated — can create new problems while appearing to fix the original one. For anything beyond clearing debris from a flat section, a professional assessment of the actual scope is worth the cost.
At minimum: a line-item breakdown of all materials (shingle product and grade, underlayment type, flashing material), labor scope (tear-off included or not, disposal, cleanup), timeline, payment terms, and warranty coverage for both materials and workmanship. It should also specify who is doing the work — the contractor’s own crew or subcontractors — and how the permit process is handled. A written estimate is not just a price — it’s a document that defines the scope of work and protects you if questions arise after the job is done. A contractor who gives you a single number without a breakdown hasn’t told you what you’re actually getting.
Yes — measurably. The Class 4 rating requires the shingle to withstand a 2-inch steel ball fired at 90 mph without cracking. That’s a meaningful threshold relative to what Central Texas hail events produce. We’ve assessed roofs after the same storm where one property had Class 4 shingles and the adjacent property had standard architectural — the difference in damage extent is consistently significant. Impact-resistant shingles don’t make a roof indestructible, and they don’t eliminate the value of a post-storm inspection. But they reduce severity in a market where hail damage is a recurring reality, not a rare event.

